Nickel Alloy Sheets

Product Details:

AL-6XN^® (AL6XN / UNS N08367) Super-Austenitic Stainless Steel

• 6.3% molybdenum
• Over 25 years of proven seawater service
• Practical immunity to chloride stress cracking
• 50% stronger than stainless
• ASME coverage up to 800°F
• Easily welded
• Available in ALL product forms

AL-6XN^® alloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.

Performance Profile

The levels of chromium, molybdenum and nitrogen in AL-6XN all serve to provide resistance to acidic oxidizing chloride solutions previously achieved only by the nickel base alloys. High nickel (24%) and molybdenum (6.3%) contents make AL-6XN a solution to chloride ion stress corrosion cracking. Because of its nitrogen content, AL-6XN has greater tensile strength than common austenitic stainlesses, while retaining high ductility and impact strength. The ASME allowable stresses for AL-6XN are up to 75% higher than for 316L stainless, and more than twice those for the copper-nickel alloys.

Additional Information:

• Delivery Time: EX-STOCK

Product Details:

The stainless austenitic special steel 1.4565 (alloy 24) is mainly used in sea water systems, crude oil transport, and in in environmental technology.

Our product range in 1.4565 are tubes and pipes, fittings and flanges, accessories.

 

 

 

 

flue gas desulphurating plants, apparatus engineering, sea water systems, sea water desalination plants, crude oil transport, transport systems for dredges in environmental technology

Additional Information:

• Delivery Time: EX-STOCK

Product Details:

Alloy 926 Sheets Exporter, UNS N08926 Plates, Alloy 926 Sheets, Alloy 926 Plate, Alloy 926 Cold Rolled Plates, Alloy Werkstoff Nr. 1.4529 Perforated Sheets Manufacturer & Supplier in India Alloy 926 Hot Rolled Plates, Gr 926 Alloy Plates, Alloy 926 Hot Rolled Sheets, Grade 926 Alloy Shim Sheets, Alloy UNS N08926 Sheets, Alloy 926 Plates Providers

At Unifit Metalloys Inc, we are specialized and experienced Manufacturer, Exporter, and Stockholder of Alloy 926 Sheets & Plates in Mumbai, India and across worldwide. Alloy 926 Sheets is also referred as UNS N08926 that has the combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, and nitrogen improves yield and tensile strengths.

 

We offer a wide range of Alloy 926 Plates as per the requirements of our esteemed clients. Alloy 926 is a super-austenitic molybdenum stainless steel that exhibits excellent resistance to a variety of highly corrosive environments. They are used in various heavy duty applications including chemical storage and processing, aerospace, and food processing.

 

Moreover, we offer Alloy 926 Carpenter Sheets & Plates has resistance to chloride stress corrosion cracking, Thus it made Carpenter 926 Structural a widespread choice for an extensive range of uses such as manufacturing and processing of synthetic and plastics fibers.

 

Alloy 926 Sheets & Plates Chemical Composition

 

Alloy 926 Sheets & Plates Physical Properties

 

Alloy 926 Sheets & Plates Mechanical Properties

 

Additional Information:

• Delivery Time: EX-STOCK

Product Details:

UNIFIT METALLOYS INC is a Manganese plates are manufactured and designed using optimum quality raw material based on advanced machines technology. These manganese plates are available in different dimensions and sizes and can be customized as per the clients’ requirements. The main feature of this manganese plates is its superior "wear and resistance We are offering a wide range of of 12-14 % Manganese Steel Plate. The Standard of this 12-14 % Manganese includes CREUSABRO, 12-14% Manganese Steel, head field manganese plate, manganese steel, ® M / X120 Mn12 / 12-14% Manganese. This is highly durable and have excellent performance find applications in various industries

Manganese Steel Plates we Stock

• Manganese Steel Plate x120 mn 12
• Hadfield Manganese Steel Plate
• HIGH Manganese Plates A128 GRADE

 

We can supply Manganese Steel Plates:
Thickness from 5mm to 150mm
Width: from 1,500mm to 2,500mm
Length: from 6,000mm to 12,000mm

Technical conditions
1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 3.1 / 3.2
3) Charpy Impact tested at -20 / - 46 DegC.
4) Furnace Normalised
5) BQ Plates with IBR form IV

Standards:

 

Mechanical Properties

Physical Properties

Types of Packaging:

• - Bundles (hexagonal)
• - Wooden Boxes
• - Crates (steel/wooden)
• - Special crates for U-Bend tubes with each radius separated
• - Packaging for 12 to 14% Manganese Steel Plate EN10025-6 as per customer's requirements

Product Details:

UNIFIT METALLOYS INC is a leading manufacturer and stockist of the entire industrial stainless steel and Sanicro 28 Sheets & Plates. All the products are made with the high quality of the raw material and international grade & standards for the excellent performance in the harsh environments. These products are available in numerous forms and types for a better variety to the customer. We even design the customized form of the product as per the customer instruction and dimensions.

Sanicro 28 Sheets & Plates are made with the help of both physical and mechanical properties so that the sheets and plates could get the high strength and hardness of the sheets and plates. Basically, these products are also made with various chemical compositions such as manganese, carbon, phosphorous, silicon, nickel, copper, chromium, and phosphorus as well. These products are also designed with various specifications such as types, sizes, standards, pressure, dimensions, and class and with many other specifications. These products are available in many of the types such as seamless, perforated, ERW, and fabricated as well.

Sanicro 28 ASTM B709 Plates, ASTM B709 Sanicro 28 Coils Supplier, SANICRO 28 #4 Finish Plates, 28 Sanicro Chequered Plates Stockists, Sanicro 28 Shim Sheets, ASTM B709 Sanicro 28 Sheets Exporter, Sanicro 28 Hot Rolled Plates, Alloy 28 Perforated Sheets, Sanicro 28 CR Sheets, Sanicro 28 Sheets and Plates Manufacturer in India.

Sanicro 28 Sheets & Plates are suitable for the use in many of the industries and general works such as oil and gas refineries, power generations, water & gas pipeline, petroleum refineries, chemical plants, industrial machinery, and nuclear, thermal and solar power plants. Also, these are applicable in the petrochemical industry, pharmaceutical industry, seawater equipment, pharmaceutical equipment, chemical equipment, paper industry, heat exchanger and condensers as well.

Product Details:

Alloy 80A Plate is a wrought, age-hardened alloy that is strengthened by additives like titanium, aluminium and carbon. Nimonic 80A Plate is manufactured by high-frequency melting and casting in air. If compare few features of Nimonic 80A Sheet the you will find Nimonic 80A Clad Plate is similar to NIMONIC alloy 75 plate. Nimonic 80A Shim has good corrosion and oxidation resistance. The creep rupture and tensile properties are high at 815°C (1500°F). Nimonic 80A Rolling Sheets can be welded using common techniques, using a matching filler metal. Nimonic 80A Coil can be hot worked at temperature ranges of 1050-1200°C (1920-2190°F). These Nimonic Alloy 80A Plates can be hot forged at temperatures in the range of 982-1176°C (1800-2150°F). Nimonic 80A Rolling Plate should be annealed at 1079°C (1975°F) for about 8 hours and air cooled. Nimonic 80A Flat Shim from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 80A Perforated Plate, Nimonic 80A Hot rolled Plate & Nimonic 80A Cold rolled Plate. Nimonic® 80A Plate is also known as Nicrofer 7520 Ti sheet, Pyromet 80A sheet, Superimphy 80A sheet, and Udimet 80A sheet.

If you are looking for Nimonic 80A Flat Sheet feel free to contact at sales@unifitmetalloys.com for any assistance. Our support team will give you prompt response to all your queries even on holidays.

UNIFIT METALLOYS INC offers one of the widest ranges of Nimonic Alloy 80A sheet and Nimonic Alloy 80A plate in various qualities, sizes and grades which are equivalent to Nimonic 80A Sheet & Nimonic 80A Plate (2mm to 12mm). Nimonic 80A Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 80A plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 80A Sheets, thin and ultra-thin gauge Nimonic Alloy 80A strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 80A Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 80A Polished Plate by pickling or buff-polishing. Nimonic 80A Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 80A Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 80A Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 80A plates based on dimensions and shape. Nimonic 80A Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Product Details:

Nimonic Alloy 90 is a precipitation hardenable Nickel-Chromium-Cobalt alloy with high strength at temperatures up to 1300F (704C) and creep and oxidation resistance up to 1688F (920C). Unifit Metalloys Inc is a leading supplier and exporter of Nimonic 90 Strips, Sheet & Plate. We provide Nimonic Alloy 90 Strips, Sheet & Plate as per the requirements of our customers and deliver quality products on time.

Nimonic Alloy 90 Strips, Sheet & Plate are available in different types such as Nimonic Alloy 90 Strips, Sheet & Plates(BS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208, MSRR 7104), Nimonic Alloy 90 Strips Exporter in India, Nimonic Alloy 90 Sheets Exporter in India, Nimonic Alloy 90 Plates Exporter in India, Nimonic Alloy UNS N07090 Strips, Sheet & Plates, Nimonic Alloy DIN 2.4632 Strips, Sheet & Plates, 90 Nimonic Strips, Sheet & Plates, Nimonic Alloy UNS N07090 Plates, Nimonic Alloy UNS N07090 Sheet, Nimonic Alloy UNS N07090 Plates, Nimonic Alloy 90 Shim Sheets, Nimonic Alloy 90 DIN 2.4632 Chequered Plate.

Nimonic Alloy 90 Strip, Sheet & Plate is ordinarily utilized as a part of compelling anxiety applications, for example, turbine sharp edges, hot working instruments, deplete reheaters, plate and high-temperature springs.

Characteristics:
1. Good mechanical properties
2. Yield tensile strength
3. Highly resistant to chloride and sulfide stress corrosion cracking
4. Resistant to aqueous corrosion and chloride ion stress corrosion cracking

Chemical Composition of Nimonic Alloy 90 (UNS N07090) Strips, Sheet & Plate


Mechnaical Properties of Nimonic Alloy 90 (UNS N07090) Strips, Sheet & Plate

 

Additional Information:

• Item Code: UMI13
• Production Capacity: 50,000
• Delivery Time: READY STOCK
• Packaging Details: LOOSE

Product Details:

Nimonic 75 Plate is a Nickel-Chromium alloy with good corrosion and heat resistance. Nimonic 75 is an 80/20 nickel-chromium alloy containing titanium and carbon as additives. Nimonic 75 Sheet are primarily composed of nickel and chromium. These Nimonic 75 Coil are mainly known for their high performance and high-temperature low-creep. All Nimonic 75 Rolling Sheets has high creep-rupture properties at temperatures to about 1740°F (950°C). Nimonic 75 Flat Sheet is in demand by many industries such as gas turbines for blades, discs, and shafts. Nimonic® 75 is also known as Nicrofer 7520. Nimonic 75 is readily fabricated and welded. Nimonic 75 alloy exhibits good corrosion resistance, mechanical properties and heat resistance. Nimonic Alloy 75 Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 75 Clad Plate and Nimonic 75 Shim.

If you are looking for Nimonic 75 Rolling Plate feel free to contact at sales@unifitmetalloys.com for any assistance of Nimonic 75 Flat Shim & Nimonic 75 Perforated Plate as well Nimonic 75 Hot rolled Plate welding. Our support team will give you prompt response to all your queries regarding Nimonic 75 Cold rolled Plate even on holidays.

Unifit Metalloys Inc offers one of the widest ranges of Nimonic Alloy 75 sheet and Nimonic Alloy 75 plate in various qualities, sizes and grades which are equivalent to Nimonic 75 Sheet & Nimonic 75 Plate (2mm to 12mm). Nimonic 75 Sheet is available in thicknesses ranging from .016 to .156". Large size Nimonic 75 plate will also diminish the size of the undesirable heat-affected zone caused by welding. We also stock & supply extra large-size Nimonic 75 Sheets, thin and ultra-thin gauge Nimonic Alloy 75 strip and foil products, rolled down to 2 microns.

Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of Nimonic 75 Hot Rolled Plates in uniformly of excellent quality. We apply the process of surface finishing to our Nimonic 75 Polished Plate by pickling or buff-polishing. Nimonic 75 Strips levels of finishing & cut can be adjusted according to your requirements. Nimonic 75 Plate is available in the form of Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate and Flat Shim. The Nimonic 75 Plate Weight Calculator allows you to calculate an estimate of the weight of different sizes of Nimonic 75 plates based on dimensions and shape. Nimonic 75 Shim is sold in either 300mm or 600mm rolls and sheet form. The thin material can be used in power plants, nuclear plants or gas and oil refineries.

Additional Information:

• Item Code: UNIFIT129
• Production Capacity: 100 TONS
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX PACKING

Product Details:

UNIFIT METALLOYS INC is a leading manufacturer and stockiest of the entire industrial stainless steel and Sanicro 28 Sheets & Plates. All the products are made with the high quality of the raw material and international grade & standards for the excellent performance in the harsh environments. These products are available in numerous forms and types for a better variety to the customer. We even design the customized form of the product as per the customer instruction and dimensions.

Sanicro 28 Sheets & Plates are made with the help of both physical and mechanical properties so that the sheets and plates could get the high strength and hardness of the sheets and plates. Basically, these products are also made with various chemical compositions such as manganese, carbon, phosphorous, silicon, nickel, copper, chromium, and phosphorus as well. These products are also designed with various specifications such as types, sizes, standards, pressure, dimensions, and class and with many other specifications. These products are available in many of the types such as seamless, perforated, ERW, and fabricated as well.

Sanicro 28 ASTM B709 Plates, ASTM B709 Sanicro 28 Coils Supplier, SANICRO 28 #4 Finish Plates, 28 Sanicro Chequered Plates Stockists, Sanicro 28 Shim Sheets, ASTM B709 Sanicro 28 Sheets Exporter, Sanicro 28 Hot Rolled Plates, Alloy 28 Perforated Sheets, Sanicro® 28 CR Sheets, Sanicro 28 Sheets and Plates Manufacturer in India.

Sanicro 28 Sheets & Plates are suitable for the use in many of the industries and general works such as oil and gas refineries, power generations, water & gas pipeline, petroleum refineries, chemical plants, industrial machinery, and nuclear, thermal and solar power plants. Also, these are applicable in the petrochemical industry, pharmaceutical industry, seawater equipment, pharmaceutical equipment, chemical equipment, paper industry, heat exchanger and condensers as well.

Product Details:

Alloy 31 is a nickel, chromium and molybdenum stainless steel with nitrogen and copper additions. It combines moderate tensile strength and high ductility with excellent corrosion resistance in sulfuric acid, reducing and oxidizing media and has strong resistance to corrosion and erosion corrosion in phosphoric environment.

Typically the alloy has PREN of ≥ 48, which ensure that the resistance to pitting corrosion is high.

APPLICATIONS

Used in f.ex pulp and paper industry, flue gas desulphurization – FGD – systems, sea water heat exchangers, petroleum production and refining industry, mining industry, ore processing etc.

Heat Treatment
Solution annealing at min 1150°C followed by water quenching.

Weldability
Very good.

CHEMICAL COMPOSITION

PREN = (Cr% + 3.3Mo% + 16N%) ≥ 48.
Product Standards: ASTM B625 – 14.
Approvals: For usage in pressure vessels with wall temperatures between -196°C to 550°C.

Mechanical Properties: BAR