Stainless Steel Fasteners

Product Details:

UNIFIT METALLOYS INC is one of the known suppliers and distributors of SS 904L Bolts, which is an austenitic alloy requirement in providing moderate to soaring corrosion resistance. Stainless Steel 904L Square Bolts is generally used in Food industry, Chemical industry, Marine environment, Pharmaceutical industry, and more. Mechanically, Stainless Steel 904L Round Head Bolts is completely austenitic and is less subtle to precipitation ferrite and sigma phases than conformist austenitic steels by means of soaring content of molybdenum. Stainless Steel 904L Heavy Hex Screws is considered for its usage in severe corrosive forms, where it has been proved over a lot of years and was initially formed to resist corrosion in thinned sulphuric acid. Stainless Steel 904L Hex Screws is an austenitic alloy that is being considered for modest to great corrosion resistance, where its low content of carbon enhanced cleanliness and weld potency.

The adding of copper content to Stainless Steel 904L Hex Bolts offers that its corrosion resistant qualities are higher to the conservative chrome-nickel alloys, in specific to phosphoric, acetic and sulphuric acids. Stainless Steel Din 1.4539 Bolts is a non-steadied austenitic alloy by means of low content of carbon, which is as well resistant to SCC along with crevice corrosion. The austenitic formation as well offers Stainless Steel UNS NO8904 Bolts by means of outstanding durability, even down to cryogenic temp. In the meantime, the “L” in Stainless Steel 904L Heavy Hex Bolts denotes for Low Carbon content, precisely, that carbon additional to the alloy signifies 0.03% or minus, which signifies that it has very much first-rate of welding properties. Buy 904L Stainless Steel Boltsat reasonable rates from us.

ASTM A 674 / ASME SA 674 STAINLESS STEEL COUNTERSUNK SLOTTED SCREW, STAINLESS STEEL 904L U BOLT, SS 904L HEX BOLTS, STAINLESS STEEL 904L EYE BOLTS, SS 904L PLOW BOLT SUPPLIER & EXPORTERSTAINLESS STEEL 904L BOLTS MECHANICAL PROPERTIES

STAINLESS STEEL 904L BOLT CHEMICAL COMPOSITION

STAINLESS STEEL 904L BOLT SPECIFICATION

Product Details:

Unifit Metalloys Inc is a known Manufacuring of Stainless Steel 904L Stud Bolts, which is non-magnetic because of its make-up. The austenitic configuration of SS 904L Stud Bolts offers superior hardness even lower than cryogenic temperature, where full annealing should follow any hot work to re-attain maximum ductility and corrosion resistance. Alloy 904L Stud Bolts has good resistance to pitting and crevice corrosion, where uniform corrosion occurs in acids or in hot alkaline solutions. Common applications take advantage of corrosion resistance, and so Grade 904L Stud Bolts is used for Gas washing, Control and instrumentation. Moreover, the addition of copper to Type 904L Stud Bolts develops resistance to sulfuric acid, where its maximum service temperature is at 450 Degree C. Copper adds reducing acids, particularly in the very aggressive "mid concentration" range, where further AISI 904L Stud Bolts is often replaced by low cost duplex stainless steel 2205.

904L Stainless Steel Stud Bolts is often used in chemical processing — process equipment for the production of sulfuric, phosphoric, inorganic and organic acids and the production of phosphate-based fertilizers. Typical uses of Stainless Steel UNS N08904 Stud Bolts include wiring in electrostatic preceptors, seawater cooling devices, oil refinery components, gas scrubbing plants, acetic, pulp and paper processing industries, phosphoric and sulfuric acid processing plants. Thanks to the higher Cr, Ni, Mo and Cu content, Stainless Steel DIN 1.4539 Stud Bolts show the best corrosion resistance properties for this stainless steel family.

904L Stainless Steel Stud Bolt Specification

Standard ASTM A182, A479 / ASME SA182, SA479

Dimensions DIN / ISO / ASME / ANSI / UNI / BS / BIS / SAE, etc.

Threads UNC, UNF, UNEF, UN, Coarse, Fine & BSW.

Type All Thread, Double End, Single End

Size Metric M1 to M152 & Imperial #0 to 8" Bolt Diameter

Length Bolts upto 2500mm shank length.

Construction Hot Forged, Cold Forged, Bar Stock Machined

Surface Finish Self Color, Hot Dip Galvanized, Electro Galvanized, Di-Chromated, P.T.F.E. Coated or any other as per order requirement

904L Stainless Steel Stud Bolts Equivalent Indian Standard ASTM A182 / ASME SA182 Stainless Steel Gr 904L Stud Bolt Chemical Composition ASTM A479 / ASME A479 Stainless Steel 904L Stud Bolt Mechanical Properties

Product Details:

UNIFIT METALLOYS INC is one of the recognized manufacturers and exporters of SS SMO 254 Washers, which is a very high end austenitic stainless steel that combines impact toughness resistance to chloride stress corrosion cracking, pitting and crevice corrosion with strength nearly twice that of 300 series stainless steels. Stainless Steel UNS S31254 Washershas High resistance to general corrosion, High resistance to stress corrosion cracking, and Higher strength than conventional austenitic stainless steels. Stainless Steel SMO 254 Flat Washershas high strength compared to 316L and 317L austenitic stainless steels. Stainless Steel SMO 254 Punched Washersis developed for use in halide-containing environment such as seawater, hydrochloric acid and contaminated sulphuric acid. Stainless Steel SMO 254 Spherical Washershas high work hardening rate combined with a lack of sulfur makes it very difficult to machine.

STAINLESS STEEL SMO254 WASHERASTM A 479 / ASME SA 479 SS ROUND WASHER, STAINLESS STEEL SMO254 MACHINED WASHERS, SS SMO254 PUNCHED WASHER, STAINLESS STEEL SMO254 FLAT WASHERS, SS SMO254 FENDER WASHER SUPPLIER & EXPORTER
In new construction, Stainless Steel SMO 254 Lock Washers has been found in many cases to be a technically adequate and much less costly substitute for nickel-based alloys and titanium. For certain applications, Stainless Steel SMO 254 Spring Washers have been reported to be a cost-effective substitute for high nickel and titanium alloys. Stainless Steel SMO 254 Square Washersis often used in Petroleum production, Saltwater handling, Food and chemical processing equipment, Pulp mill bleach systems, etc. Stainless Steel SMO 254 Round Washers is also used in Flue gas desulphurization scrubbers, Tall oil distillation columns, Offshore oil & gas production equipment, Desalination equipment and more. Buy SMO 254 Stainless Steel Washers at reasonable rates from us.


OTHER TYPES OF STAINLESS STEEL SMO254 WASHERS
SS UNS S31254 SPHERICAL WASHERS, STAINLESS STEEL SMO254 LOCK WASHERS, SMO254 SS SPRING WASHER, STAINLESS STEEL SMO254 SQUARE WASHER MANUFACTURER & STOCKISTSTAINLESS STEEL SMO254 WASHERS SPECIFICATION

Product Details:

UNIFIT METALLOYS INC is one of the recognized distributors and exporters of SS 904L Washers which is an austenitic stainless steel intended for use under severe corrosion conditions. Stainless Steel UNS NO8904 Washers is very useful for details in marine environment, chemical and pharmaceutical industry. Stainless Steel Din 1.4539 Washers is also used in utility scrubber assemblies, acid and fertilizer production equipment. Stainless Steel 904L Spherical Washersis non-magnetic, and offers excellent formability, toughness and weldability. Stainless Steel 904L Lock Washersalso has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper, Stainless Steel 904L Spring Washers has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions. Stainless Steel 904L Square Washers is difficult to machine and has a tendency towards work hardening

STAINLESS STEEL 904L WASHERS CHEMICAL COMPOSITION STAINLESS STEEL 904L WASHER MECHANICAL PROPERTIES
STAINLESS STEEL 904L WASHERS SPECIFICATION STAINLESS STEEL 904L WASHERSS UNS N08904 SPHERICAL WASHERS, STAINLESS STEEL 904L LOCK WASHERS, 904L SS SPRING WASHER, STAINLESS STEEL 904L SQUARE WASHER MANUFACTURER & STOCKIST

In With the right choice of tool and machine data, fully satisfactory machining results can be obtained with these Stainless Steel 904L Round Washers. The high resistance of Stainless Steel 904L Machined Washersagainst stress corrosion cracking is due to the presence of high amounts of nickel in its composition. Stainless Steel 904L Punched Washersis a recommended austenitic stainless steel for use in the applications where grades 316l or 317l cannot provide the required corrosion resistance properties. Stainless Steel 904L Flat Washersis also less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. Buy 904L Stainless Steel Washers at reasonable rates from us.

Product Details:

UNIFIT M ETALLOYS INC is one of the main producers, stockists, and exporters of overwhelming quality Shim Washers in different examples which are made of premium quality stainless steel and propelled hardware.Prominent & Leading Manufacturers and Suppliers from Mumbai, UNIFIT METALLOYS INC offer Shim Washers that are most commonly used in several industrial purposes certified to ensure the excellent range of quality and performance.

Our Unifit Metalloys Inc is currently offering Shim Washers for Industrial and engineering purposes. We have more than 70,000 bits of stock accessible for conveyance around the world. Materials can be stuffed for accumulation or dispatch that day as a request is set sparing you time. We will take care of clients necessities. We can likewise create non standard fittings and spines on speedy lead times, and ship products via AIR cargo or SEA cargo from both European and Non European makers.

 

Standard Specifications of Shim Washer

Ready Stock of Shim Washer Types