Product Details:
Material | Super Duplex 32750 Stud |
Brand | UNIFIT METALLOYS INC |
Grade | Super Duplex 32750 Stud |
Size | M6 TO M64 |
Type | STUD BOLT |
Surface Finish | NATURAL |
Material Grade | Super Duplex 32750 Stud |
SUPER DUPLEX STEEL HEX BOLTS
SUPER DUPLEX SQUARE WASHER
SUPER DUPLEX STEEL HEX NUTS
Often a light gauge of ASTM A479 Super Duplex Steel UNS S32750 Fasteners can be used to achieve the same design strength of a thicker nickel alloy. The resulting weight savings can considerably reduce the overall cost of fabrication. ASME SA 479 Super Duplex Steel Din 1.441 Fasteners is widely used in the following sectors: Power, Marine, Chemical, Pulp and paper, Petrochemical, Water desalinization, Oil and gas production and more. ASTM A479 Din 1.441 Fasteners cannot be hardened by heat treatment but stronger surface strengths can be achieved by cold working. ASME SA 479 UNS S32750 Fasteners has extremely high resistance to various types of corrosion, and also has good weldability which can be welded by several methods. Buy Super Duplex Stainless Steel Fasteners in leading market price from us.
ASTM A479 SUPER DUPLEX STEEL FASTENERS, SUPER DUPLEX STEEL HEX CAP SCREW, SUPER DUPLEX ALLOY 2507 HIGH TENSILE FASTENERS, SUPER DUPLEX STEEL UNS S32750 NUTS, SUPER DUPLEX STEEL FLAT WASHER SUPPLIER & EXPORTERSUPER DUPLEX STEEL UNS S32750 FASTENERS SPECIFICATIONMaterial | Specification | Standards | Size | Length |
Super Duplex Steel
| IS BS ASTM | ASTM / ASME - A/ SA A479 | 3 mm | M02 to M30 |
Product Details:
Material | Duplex 2205 Stud Bolt |
Brand | UNIFIT METALLOYS INC |
Grade | Duplex 2205 Stud Bolt |
Size | M6 TO M64 |
Type | STUD BOLT |
Surface Finish | NATURAL |
Material Grade | Duplex 2205 Stud Bolt |
Duplex | Common Name | Related Specifications | ||
---|---|---|---|---|
European | UNS | ASTM/ASME | ||
Duplex 2205/31803 | SAF 2205 ® | 1.4462 | S31803/S32205 | F51/F60 |
Density lbm/in3 | Electrical Resistivity mW•in | Electrical Resistivity (in x 10-6) | Heat Capacity BTU/lbm•°F | Thermal Conductivity (BTU/hr•ft•°F) | |
---|---|---|---|---|---|
at 68°F | 0.278 | 0.112 | 8.7 | 27.6 | 33.5 |
at 212°F | 0.119 | 9.2 | 26.1 | 35.4 | |
at 392°F | 0.127 | 9.8 | 25.4 | 37.4 | |
at 572°F | 0.134 | 10.4 | 24.9 | 39.4 |
Grade | Tensile Strength (MPa) min | Elongation (% in 50mm) | Yield Strength 0.2% Proof (MPa) min | Hardness Rockwell C (HR C) |
---|---|---|---|---|
UNS-S 31803 | 650-880 | 25 | 448 | |
UNS-S 32205 | 621 | 25 | 448 | 21 max |
Cr | N | Ni | C | Mn | Si | P | S | Mo | |
---|---|---|---|---|---|---|---|---|---|
S31803 | min: 21.0 max: 23.0 | min: 0.08 max: 0.20 | min: 4.5 max: 6.5 | 0.03 max | 2.0 max | 1.0 max | 0.03 max | 0.02 max | min: 2.5 max: 3.5 |
S32205 | min: 22.0 max: 23.0 | min: 0.14 max: 0.20 | min: 4.5 max: 6.5 | 0.03 max | 2.0 max | 1.0 max | 0.03 max | 0.02 max | min: 3.0 max: 3.5 |
Material | Specification | Standards | Size | Length |
Duplex Steel
| IS BS ASTM | ASTM / ASME - A/ SA 479 / 479 | 3 mm | M02 to M30 |
Product Details:
Material | DUPLEX 2205 |
Brand | UNIFIT METALLOYS INC |
Grade | DUPLEX 2205 |
Size | M3 TO M64 |
Type | WASHER |
Surface Finish | NATURAL |
Material Grade | DUPLEX 2205 |
Cr | N | Ni | C | Mn | Si | P | S | Mo | |
---|---|---|---|---|---|---|---|---|---|
S31803 | min: 21.0 max: 23.0 | min: 0.08 max: 0.20 | min: 4.5 max: 6.5 | 0.03 max | 2.0 max | 1.0 max | 0.03 max | 0.02 max | min: 2.5 max: 3.5 |
S32205 | min: 22.0 max: 23.0 | min: 0.14 max: 0.20 | min: 4.5 max: 6.5 | 0.03 max | 2.0 max | 1.0 max | 0.03 max | 0.02 max | min: 3.0 max: 3.5 |
Grade | Tensile Strength (MPa) min | Elongation (% in 50mm) | Yield Strength 0.2% Proof (MPa) min | Hardness Rockwell C (HR C) |
---|---|---|---|---|
UNS-S 31803 | 650-880 | 25 | 448 | |
UNS-S 32205 | 621 | 25 | 448 | 21 max |
Material | Specification | Standards | Size | Length |
Duplex Steel
| IS BS ASTM | ASTM / ASME - A/ SA 479 / 479 | 3 mm | M02 to M30 |
Product Details:
Material | Super Duplex 32750 |
Brand | UNIFIT METALLOYS INC |
Grade | Super Duplex 32750 |
Size | M3 TO M64 |
Type | HEX BOLT |
Surface Finish | MACHINED |
Alloy | Common Name | Related Specification | ||
---|---|---|---|---|
European | UNS | ASTM/ASME | ||
Alloy S32750 | SAF S32750 ® | 1.4410 | S32750 | ASTM A479 |
Properties | Metric | Imperial |
---|---|---|
Density | 7.8 g/cm3 | 0.281 lb/in3 |
Melting point | 1350°C | 2460°F |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) | Hardness Rockwell C (HR C) |
---|---|---|---|---|
Alloy 32750 | 795 | 550 | 15 | 32max |
Element | Content (%) |
---|---|
Chromium, Cr | 24 – 26 |
Nickel, Ni | 6 – 8 |
Phosphorous, P | 0.035 max |
Carbon, C | 0.030 max |
Sulfur, S | 0.020 max |
Molybdenum, Mo | 3 – 5 |
Manganese, Mn | 1.20 max |
Silicon, Si | 0.80 max |
Copper, Cu | 0.50 max |
Nitrogen, N | 0.24 – 0.32 |
Iron, Fe | Balance |
Material | Specification | Standards | Size | Length |
Super Duplex Steel
| IS BS ASTM | ASTM / ASME - A/ SA 479 | 3 mm | M02 to M30 |
Product Details:
Material | SUPER DUPLEX 32750 |
Size | 8 |
Brand | UNIFIT METALLOYS INC |
Country of Origin | Made in India |
We specialise in Super Duplex Steel UNS S32750 Washers Exporting in Turkey, Egypt, Singapore, Malaysia, Indonesia, Jordan, South Africa, Oman, Qatar, Italy.
UNS S32750 Super Duplex Steel Washer Specification :Specifications | : | ASTM A193 / ASTM A194 | ||||||
Standards | : | DIN, ASTM, BS and all International Standards | ||||||
Length | : | UPTO 5 METERS | ||||||
Size | : | M10 to M100 | ||||||
Types | : | Washers, Spring Washers ASTM A182 Super Duplex UNS S32750 Washer Super Duplex Steel UNS S32750 Washer ASTM A182 Super Duplex Steel Washers Equivalent Grades
|