Unifit Metalloys Inc.
Unifit Metalloys Inc.
Girgaon, Mumbai, Maharashtra
GST No. 27ARVPJ3975B1ZE
TrustSEAL Verified
Call 0804897398181% Response Rate
SEND EMAIL

Inconel Fasteners

Our range of products include inconel 800h/ht stud bolt, inconel 600 hex bolt, monel 400 hex bolt, inconel 600 stud bolt, inconel 800h/ht hex bolt and inconel 800h/ht washer.

Inconel 800H/HT Stud Bolt

Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
  • Inconel 800H/HT Stud Bolt
Get Best Quote
Approx. Price: Rs 150 / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
StandardINCONEL 800H/HT STUD
BrandUNIFIT METALLOYS INC
Product TypeBolt
SizeM6 TO M64
MaterialINCONEL 800H/HT STUD
GradeINCONEL 800H/HT STUD
Head ShapeSTUD BOLT
Surface TreatmentPlain

Unifit Metalloys Inc offers an extensive quality collection of Incoloy Alloy 800 / 800H / 800HT Fasteners (Nuts Bolts), which is extremely resistant to corrosion and even in acidic environment. Because of its high nickel and chromium content, Incoloy 800 Hex Head Bolts resist oxidation and carburization at high temperatures. The chemical balance allows the Incoloy 800H Square Nuts to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. For the first time, aluminum and titanium were listed as purposeful additions, and annealed Incoloy 800HT U-Bolts was differentiated from solution – annealed material. Incoloy 800 Lock Nuts will not become embrittled even after long periods of usage in the 1200 Degree F – 1600 Degree F range where many stainless steels become brittle. The restricted chemical compositions, combined with the high temperature anneal, assure these materials have greater creep and rupture strength when compared to Incoloy 800H Eye Bolts



800/ 800H/ 800HT Incoloy Alloy Bolt/Nut Chemical Composition

Grade C Mn Si Fe S Cr Al-Ti Ni
800 min. 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800H min. 0.05 39.5 19.0 0.15 30.0
max. 0.1 1.5 1.0 0.015 23.0 0.60 35.0
800HT min. 0.06 39.5 19.0 0.85/0.25 30.0
max. 0.1 1.5 1.0 0.015 23.0 1.20/0.60 35.0
Request
Callback
Yes! I am Interested

Inconel 600 Hex Bolt

Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
  • Inconel 600 Hex Bolt
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

SizeM3 TO M64
BrandUNIFIT METALLOYS INC
Head TypeHEX
TypeBOLT
Thread TypeFull Thread
MaterialINCONEL 600
GradeINCONEL 600
ColorSilver

UNIFIT METALLOYS INC is one of the renowned manufacturers and suppliers of Inconel 600 Bolts. These Inconel 600 Hex Bolts are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. The high nickel content gives Inconel 600 Heavy Hex Bolts resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Inconel 600 Hex Cap Screws are manufactured from alloy containing nickel as base element with additions of chromium. These Inconel 600 Hex Screws are designed to have exceptionally high strength and creep-rupture properties at higher temperatures and pressures. Inconel 600 Socket Cap Screws are available in various types and specifications, our clients can avail these fasteners at economical prices. Inconel 600 Machine Screws is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion.

ASTM B166 INCONEL ALLOY HEX BOLTS, INCONEL 600 HEAVY HEX BOLT, INCONEL 600 HEX CAP SCREW, INCONEL ALLOY 600 HEX SCREW, INCONEL ALLOY 600 SOCKET CAP SCREW SUPPLIER & EXPORTERINCONEL ALLOY 600 BOLTS GRADE DESIGNATION
AlloyCommon NameRelated Specification
  BritishEuropeanASTMUNS
Alloy 600Inconel 600 ®BS 3076 NA 142.4816B166N06600


INCONEL ALLOY 600 BOLT MECHANICAL PROPERTIES
Density8.47 g/cm3
Melting Point1413 °C (2580 °F)
Tensile StrengthPsi – 95,000 , MPa – 655
Yield Strength (0.2%Offset)Psi – 45,000 , MPa – 310
Elongation40 %


INCONEL ALLOY 600 BOLTS CHEMICAL COMPOSITION
ElementContent (%)
Nickel, Ni72.0 min
Silicon, Si.50 max
Carbon, C.15 max
Sulphur, S.015 max
Copper, Cu.50 max
Iron, Fe6.0-10.0
Manganese, Mn1.00 max


INCONEL ALLOY 600 BOLTS SPECIFICATION
MaterialSpecificationStandardsSize
Length

Inconel Alloy 600

 

IS

BS

ASTM

ASTM B166

3 mm
to 
200 mm

M02 to M33

Request
Callback
Yes! I am Interested

Monel 400 Hex Bolt

Monel 400 Hex Bolt
  • Monel 400 Hex Bolt
  • Monel 400 Hex Bolt
  • Monel 400 Hex Bolt
  • Monel 400 Hex Bolt
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

SizeM3 TO M64
BrandUNIFIT METALLOYS INC
Head TypeHEX
TypeHEX BOLT
Thread TypeFull Thread
MaterialMONEL 400
GradeMONEL 400
ColorSilver

UNIFIT METALLOYS INC  is one of the well-known manufacturers of Monel 400 Bolts, which is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. We manufacture Monel 400 Hex Bolts to your custom specifications, and we guarantee to meet your delivery schedule. Monel 400 Heavy Hex Bolts has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. Our product range of Monel 400 Hex Cap Screws finds its usage in various industrial operations. An outstanding characteristic of Monel 400 Hex Screws is that they offer exceptional resistance to hydrofluoric acid, a particularly tough acid to deal with, in all concentrations up to the boiling point.

MONEL 400 BOLTSASTM F467 MONEL ALLOY HEX BOLTS, MONEL 400 HEAVY HEX BOLT, MONEL 400 HEX CAP SCREW, MONEL ALLOY 400 HEX SCREW, MONEL ALLOY 400 SOCKET CAP SCREW SUPPLIER & EXPORTERLarge use of Monel 400 Socket Cap Screws is made in the alkylation units, namely in the reacting section in contact with concentrated hydrofluoric acid. The Monel 400 Machine Screws is used in the following applications: Marine fixtures, pumps, valves and piping systems for sea water applications, etc. Monel 400 Allen Cap Screws are also used in Monoethanolamine (MEA) reboiling tube; Cladding for the upper areas of oil refinery crude columns; Propeller and pump shafts and more. Like with commercially pure Nickel, Monel 400 Square Bolts is low in strength in the annealed condition, for this reason a variety of tempers are used to achieve higher strength levels. Buy Alloy 400 bolts at reasonable rates from us.

MONEL 400 COUNTERSUNK SLOTTED SCREW, MONEL 400 MACHINE SCREW, MONEL ALLOY 400 ALLEN CAP SCREW, MONEL ALLOY 400 SQUARE BOLTS MANUFACTURER & STOCKIST

MONEL ALLOY 400 BOLT GRADE DESIGNATION
STANDARDWERKSTOFF NR.ASTMUNSBSGOSTAFNORJISEN
Monel 4002.4360F467N04400NA 13?????????? 28-2,5-1,5NU-30MNW 4400NiCu30Fe
MONEL ALLOY 400 BOLTS MECHANICAL PROPERTIES
PropertiesMetricImperial
Tensile strength(annealed)517-620 MPa75-90 ksi
Yield strength172-345 MPa25-50 ksi
Modulus of elasticity179 GPa26000 ksi
Poisson’s ratio0.320.32





MONEL ALLOY 400 BOLTS CHEMICAL COMPOSITION
ElementContent (%)
Nickel, Ni63.00 min
Silicon, Si0.5 max
Carbon, C0.3 max
Sulphur, S0.024
Copper, Cu28-34
Iron, Fe2.5 max
Manganese, Mn2 max

MONEL ALLOY 400 BOLT SPECIFICATION
MaterialSpecificationStandardsSize
Length

Monel 400

 

IS

BS

ASTM

ASTM F467

3 mm
to 
200 mm

M02 to M33

Request
Callback
Yes! I am Interested

Inconel 600 Stud Bolt

Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
  • Inconel 600 Stud Bolt
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
BrandUNIFIT METALLOYS INC
StandardInconel 600 Stud Bolt
Product TypeBolt
SizeM6 TO M64
MaterialInconel 600 Stud Bolt
GradeInconel 600 Stud Bolt
Surface TreatmentPlain

Unifit Metalloys Inc is one of the renowned manufacturers and suppliers of Inconel 600 Stud Bolt, which is a nickel-chromium-iron alloy that is a standard material for applications which require resistance to corrosion and heat. Inconel 600 Threaded Rods, which is nickel-chromium-iron alloy, is a standard engineering material for applications that require resistance to corrosion and heat. The chromium content of Alloy 600 Threaded Rods makes it superior to commercially pure nickel under oxidizing conditions. Inconel 600 Threaded Bars have good resistance to aqueous corrosion, has high mechanical strength, and is readily formed and machined. Because of its high thermal stability, Inconel 600 Tie Bars can be used in service temperatures ranging from cryogenic to 2200 Degree F (982 Degree C). These Inconel 600 Tie Rods are widely demanded in various small and large scale construction industries for road lane division.

Superior quality of Inconel 600 Double Ended Studs has close tolerances and excellent finishes to meet the high-end industrial requirements. Alloy 600 Threaded Bars also has excellent mechanical properties and has a desirable combination of high strength and good workability. Heavy duty machining equipment and tooling should be used in Alloy 600 Tie Bars to minimize chatter or work-hardening of the alloy ahead of the cutting. Its high nickel content, a minimum of Ni 72%, combined with its chromium content, provides users of Alloy 600 Tie Rods a number of benefits. Buy Alloy 600 Stud Bolt at reasonable rates from us. We also supply these in different sizes and shapes.
INCONEL ALLOY 600 STUDBOLTS SPECIFICATION
MaterialSpecificationStandardsSize
Length

Inconel Alloy 600

 

IS

BS

ASTM

ASTM B166

3 mm
to 
200 mm

M02 to M33


INCONEL ALLOY 600 STUD BOLTS CHEMICAL COMPOSITION
ElementContent (%)
Nickel, Ni72.0 min
Silicon, Si.50 max
Carbon, C.15 max
Sulphur, S.015 max
Copper, Cu.50 max
Iron, Fe6.0-10.0
Manganese, Mn1.00 max

INCONEL ALLOY 600 STUD BOLT MECHANICAL PROPERTIES
Density8.47 g/cm3
Melting Point1413 °C (2580 °F)
Tensile StrengthPsi – 95,000 , MPa – 655
Yield Strength (0.2%Offset)Psi – 45,000 , MPa – 310
Elongation40 %

INCONEL ALLOY 600 STUD BOLT GRADE DESIGNATION
AlloyCommon NameRelated Specification
  BritishEuropeanASTMUNS
Alloy 600Inconel 600 ®BS 3076 NA 142.4816B166N06600
Request
Callback
Yes! I am Interested

Inconel 800H/HT Hex Bolt

Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
  • Inconel 800H/HT Hex Bolt
Get Best Quote
Approx. Price: Rs 200 / PieceGet Latest Price

Product Details:

SizeM3 TO M64
BrandUNIFIT METALLOYS INC
Head TypeHEX
TypeHEX BOLT
Thread TypeFull Thread
MaterialInconel 800H/HT
GradeInconel 800H/HT
ColorSilver

unifit metalloys inc is one of the leading manufacuters and acclaimed entity that offers an extensive range of Incoloy 800 Fasteners to the industries. The product we are offering has amazing attributes and features that make it a worthy product. Being an exporter, manufacturer and supplier we adhere to a quality range product to our valuable clients. Maintaining the quality of the product is our prime responsibility. Therefore we fabricate the product by using top quality raw material obtained from the authentic dealers of the market. By installing high performance latest equipment and technology we achieve the quality standard and accurate dimensional product. We design our customized product in various shapes, length, size and dimensions as per the requirements and needs of the clients.

 

Specifications:

Standard : DIN, ASTM, BS and all International Standards

Size : 3 mm to 200 mm

Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes

Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes

Washers Size : M1 - M64 | #4 to 3" | Custom Sizes

Length : M02 to M33

Types : Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.


INCOLOY 800/800H/800HT FASTENERS EQUIVALENT GRADES
STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENOR
8001.4876N08800NCF 800NA 15????670Z8NC32-21X10NiCrAlTi32-20XH32T
800H1.4958 / 1.4876N08810NCF 800HNA 15(H)????670Z8NC33-21X5NiCrAlTi31-20XH32T
800HT1.4859 / 1.4876N08811NCF 800HTNA 15(HT)????670-X8NiCrAlTi32-21XH32T

ALLOY 800/800H/800HT FASTENER CHEMICAL COMPOSITION
GradeCMnSiSCuFeNiCrAlTi
8000.10 max1.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.600.15 – 0.60
800H0.05 – 0.101.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.600.15 – 0.60
800HT0.06 – 0.101.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.60???0.15 – 0.60???

NICKEL ALLOY 800/800H/800HT FASTENERS MECHANICAL PROPERTIES
ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
800/800H/800HT7.94 g/cm31385 °C (2525 °F)Psi – 75,000 , MPa – 520Psi – 30,000 , MPa – 20530 %
Request
Callback
Yes! I am Interested

Inconel 800h/Ht Washer

Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
  • Inconel 800h/Ht Washer
Get Best Quote
Approx. Price: Rs 50 / PieceGet Latest Price

Product Details:

MaterialINCONEL 800H/HT
Size8
BrandUNIFIT METALLOYS INC
Country of OriginMade in India

UNIFIT METALLOYS INC is a well-known industry that is manufacturing, supplying, and exporting the high quality of Inconel 800 Washer. These washers due to excellence in its properties have found its utilities in many applications and industries. Inconel 800 flat washers are extensively used for the equipment constructions that are corrosion resistant. Inconel 800 sealing washer is used into the heat treating equipment and industrial furnaces. Moreover, we serve varieties of washer to our clients. Inconel 800 lock washers at the temperature of 1010 deg C to 1205 deg C are forged. Inconel 800 star washers are having very good sulfidation, oxidation, and carburization resistant ability. The hot working temperature of this must be between 1600 Deg F to 2200 Deg F. Inconel 800 split washer is chromium-nickel and iron-based alloy having carburization and oxidation-resistant ability at the elevated temperatures.



Specification of Incoloy 800 Washer
Standard:ASTM / ASME
Dimension:ASTM, DIN, BS, GB, IS and all International Standards
Length:M02 to M33
Washer Size:3 mm to 200 mm
Materials / Grades:Incoloy 800, 800H, 800HT
Type:Plain Washer, Spring Washer, Tooth Washer, Tapper Washer, Tab Washer, Star Washer etc.
Other Properties of Incoloy 800 Washer
  • Equivalent Grades for Incoloy 800 Washer
    STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENOR
    Incoloy 8001.4876N08800NCF 800NA 15????670Z8NC32-21X10NiCrAlTi32-20XH32T
    Incoloy 800H1.4958 / 1.4876N08810NCF 800HNA 15(H)????670Z8NC33-21X5NiCrAlTi31-20XH32T
    Incoloy 800HT1.4859 / 1.4876N08811NCF 800HTNA 15(HT)????670-X8NiCrAlTi32-21XH32T
  • Incoloy 800 Washer Chemical Composition
    GradeCMnSiSCuFeNiCrAlTi
    8000.10 max1.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.600.15 – 0.60
    800H0.05 – 0.101.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.600.15 – 0.60
    800HT0.06 – 0.101.50 max1.00 max0.015 max0.75 max39.50 min30.00 – 35.0019.00 – 23.000.15 – 0.60???0.15 – 0.60???
  • Mechanical Properties of Incoloy 800 Washer
    ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
    800 / 800H / 800HT7.94 g/cm31385 °C (2525 °F)Psi – 75,000 , MPa – 520Psi – 30,000 , MPa – 20530 %

 



Request
Callback
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Punit Jain (Proprietor)
Unifit Metalloys Inc.
Shop No-1, Ground Floor, Plot No. 13, Rassiwala Building, Near Durgadevi Udhyan
Girgaon, Mumbai - 400004, Maharashtra, India


Call Us


Send E-mail