Product Details:
Minimum Order Quantity | 500 Kg |
Thickness | 0.1MM to 300MM |
Length | 100MM to 12000MM,0.1 MTR to 12 MTR,COIL FORM |
Width | 100MM to 3000MM,0.1 MTR to 3 MTR |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sandblast,Brush,etching |
Finish | Hot rolled plate (HR),Cold rolled sheet (CR),2B,2D,BA NO(8),SATIN (Met with Plastic Coated) |
Form | Strip,Flats,Blank (Circle),Ring (Flange) etc. |
Packing | Pallete + Plastic Bardan |
Stainless Steel Sheets / Plates Standard | ASTM A240 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Kg |
Thickness | 0.1MM to 300MM,1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL. |
Length. | 100MM to 12000MM,0.1 MTR to 12 MTR,COIL FORM |
Width | 100MM to 3000MM,0.1 MTR to 3 MTR |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sandblast,Brush,etching |
Finish | Hot rolled plate (HR),Cold rolled sheet (CR),2B,2D,BA NO(8),SATIN (Met with Plastic Coated) |
Form | Strip,Flats,Blank (Circle),Ring (Flange) Coils,Foils,Rolls,Perforated Sheet,Chequered Plate |
Packing | Pallete + Plastic Bardan |
Stainless Steel Sheets / Plates Standard | ASTM A240 |
CrMo 16Mo3 Plates Equivalent Grades
DIN,WNr | BS | UNI | ISO |
16Mo3 | 240 | 16Mo3 | P26 |
243 | TS26 |
16MO3 | C | Mn | S | N | Cu | Si | P | Cr | Ni | Mo |
0.12- 0.2 | 0.40- 0.90 | 0.01 | 0.012 | 0.30 | 0.35 | 0.025 | 0.30 | 0.30 | 0.25- 0.35 |
16Mo3 | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation in 100-150 mm(%) | Elongation in 16 mm(%) | Max Thickness (mm) |
440-590 | 220-275 | 19 | 24 | 250 |
Product Details:
Thickness | 0.1MM to 300MM |
Length | 100MM to 12000MM,0.1 MTR to 12 MTR,COIL FORM |
Width | 100MM to 3000MM,0.1 MTR to 3 MTR |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sandblast,Brush,etching |
Finish | Hot rolled plate (HR),Cold rolled sheet (CR),2B,2D,BA NO(8),SATIN (Met with Plastic Coated) |
Form | Strip,Flats,Blank (Circle),Ring (Flange) etc. |
Packing | Pallete + Plastic Bardan |
Stainless Steel Sheets / Plates Standard | ASTM A240 |
S355J2+N is the most common high strength steel for construction that we sell. It is a non-alloy structural steel to EN10025-2 2004. With its increase yield strength of S355 MPa over other construction steels such as S275 and S235 it is an excellent choice for delivering critical components or major structural members. It is also the modern equivalent of the EN10025 1990 S355J2G3
We have one of the largest stocks of S355J2+N structural steel in Europe and use this for the benefit of our Asian Engineering customers to offer a range of plates that have excellent chemical and physical properties, have thicknesses that are not available in Asia or to offer large volumes of plate quickly when project timescales are short.
Heavy S355J2+N Available Ex-StockWe stock a full range of S355J2+N plate from 6 mm all the way up to very thick plates of 300 mm.
Our focus is on the heavy S355J2+N – that is from 100 mm upwards. Whilst many steel stockholders focus on plates in the 6 mm to 40 mm ranges we have a large proportion of our total tonnage specialised in the thicker plates with consistent availability of plates at all thickness ranges from 100 mm up to 250 mm
Many Asian customers undertake projects where there are origin restrictions on the steel. Our steel is best for those projects where the end user has either specified a G7 origin for the steel, or has specified Western Europe, Japan and North America. There are also the many cases where Dillinger is listed on the Approved Mill List for the project.
In all these cases we are able to help projects as the wide range of S355J2+N that we hold in stock together with the quality allows projects to proceed quickly shortening delivery timescales. This can be especially critical when customers require heavy plates quickly. For these situations we hold one of the largest stocks globally of heavy S355J2+N plates.
Product Details:
Minimum Order Quantity | 5000 Kg |
Thickness | 0.1MM to 300MM |
Length | 100MM to 12000MM,0.1 MTR to 12 MTR,COIL FORM |
Width | 100MM to 3000MM,0.1 MTR to 3 MTR |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sandblast,Brush,etching |
Finish | Hot rolled plate (HR),Cold rolled sheet (CR),2B,2D,BA NO(8),SATIN (Met with Plastic Coated) |
Form | Strip,Flats,Blank (Circle),Ring (Flange) etc. |
Packing | Pallete + Plastic Bardan |
Stainless Steel Sheets / Plates Standard | ASTM A240 |
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilometer |
Thickness | 0.1MM to 300MM |
Length | 100MM to 12000MM,0.1 MTR to 12 MTR,COIL FORM |
Width | 100MM to 3000MM,0.1 MTR to 3 MTR |
Surface | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sandblast,Brush,etching |
Finish | Hot rolled plate (HR),Cold rolled sheet (CR),2B,2D,BA NO(8),SATIN (Met with Plastic Coated) |
Form | Coils,Foils,Rolls,Plain Sheet,Shim Sheet,Perforated Sheet,Chequered Plate,Strip,Flats,Blank |
Packing | Pallete + Plastic Bardan |
Stainless Steel Sheets / Plates Standard | ASTM A240 |